Beijing Jinshengxin Testing Machine Co., Ltd.
Quality is the life of an enterprise.
Add to Cart
Φ435mm High pressure reinforcing end caps
Summary:
The end caps are made to seal the plastic pipes such as PVC, PE, PPR, ABS, etc when doing pipe inner pressure test.
It goes well with our XGY Pipe Hydrostatic Testing Machine as well as your own model.
End caps
Our annual production capacity of end caps can reach tens of thousand sets. The material of our end caps is 45# carbon steel or 304# stainless steel. We have several types of end caps, like end seal, external seal and double seal, which fit different diameters of pipes. We can also manufacture special end caps according to your test requirements.
Models:
For metric pipes:
φ10, φ16, φ20, φ25, φ32, φ40, φ50, φ63, φ75, φ90, φ110, φ125, φ140, φ160, φ180, φ200, φ225, φ250, φ280, φ315, φ355, φ400, φ450, φ500, φ560, φ630, φ710, φ800, φ900, φ1000, φ1100, φ1200, φ1500, φ2000mm.
For inch pipes:
1/2", 3/4", 1", 11/4”, 11/2”, 2”, 21/2”, 3", 4", 6", 8", 10", 12", 14", 16", 18", 20", 22", 24", etc.
Meet standards:
| ASTM D1598-2004 | Pipe, Plastic, Under Constant Internal Pressure, Time-to-Failure of (No S/S Document) |
| ASTMD1599 | Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings |
| ASTM D1599 | Standard Test Method forResistance to Short-Time Hydraulic Pressure of PlasticPipe, Tubing, and Fittings1 |
| ISO1167 | Thermoplastic pipes, joints and assemblies for fluid transport. Determination of internal pressure resistance |
| ISO13479 | Determination of resistance of polyolefin pipes for the conveyance of fluids to crack propagation |
| ISO9080 | Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO9080, Ed. 1.0 (2003) MOD) |
| DIN EN 921 (1995-01) | Thermoplastics pipes - Determination of resistance to internal pressure at constant temperature |
Design feature:
1.Include bolt, O ring ,vent valve etc all assembly complete(Interface thread size can be customized).
2.Fixture structure:
Half round pot form,easy fit out , no leakage, convenient operation.
3.Equiped with reinforcement structure.
Technical parameter:
| Max. Diameter (mm) | φ435 |
| High of one end (mm) | 385 |
| Wright of one end (KG) | 90 |
| O ring size (mm) | φ430*16 |
| Max.pressure (Mpa) | 10 |
| Nominal value (Mpa) | 7 |
Configuration
1. The bolts 1 set
2. Vent valve 1 piece
3. Connector 1 piece
4. Seal rings 1 set
