Beijing Jinshengxin Testing Machine Co., Ltd.
Quality is the life of an enterprise.
Add to Cart
XJL-300 Drop-hammer impact testing machine/PVC pipe drop hammer impact test machine
I Applicability:
XJL-300 drop-hammer impact tester is used for the impact test of non-metallic materials, such as plastic, glass, pottery, etc. At the same time, it can also carry out the impact test on the same materials to make a comparison among the qualities of the materials. It is suitable to both passing method and gradient methods.
II Technical Data:
| The hammer body mass: | 0.5kg, 0.8kg, 1.0kg, 1.25kg,1.6kg, 2.0kg, 2.5kg, 3.2kg, 4.0kg, 5.0kg, 6.3kg, 8.0kg, 10.0kg, 12.5kg, 16.0kg |
| Hammer head arc radius | R5mm, R10mm, R25mm, R30mm, R50mm |
| Table travel | 0-400mm |
| The specimen diameter | 10-400mm |
| The impact height | 0-2000mm |
| With the center of percussion jig center deviation | less than 2mm |
| Plate type | 120 ° V-type pallets or with the support flat pallet jig |
| Display | Digital display |
| Power | AC220V ± 10% 50HZ |
| Dimensions (length × width × height) | 790mm × 700mm × 3500m |
III Features:
The hammer impact testing machine controlled by single-chip microcomputer. The impact height can be preset. It can automatically prevent the secondary impact and automatically pull the hammer to the target height. The height of the hammer is displayed all the time.
XJL-300 Hammer Impact Testing Machine is of high reliability and precision. It meets with the technical requirements on hammer impact test in GB6112-85 GB/T11548 GB/T10002 GB/T13664 GB/T16800 GB/T14152 GB/14153 ISO04422 ISO3127